Solenoid Operated
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- Solenoid Operated Pressure Regulating Valve Unit
- Max Working Pressure: 21MPa
- Rated Flow: 90L/min (at 0.1MPa min control pressure)
- Pressure Adjustment Range: 0-4MPa
- Pilot Rate Flow: 2L/min
- Pilot Pressure: 10 type (requires 1.2MPa or higher)
- Operating Temperature: 0-60°C (hydraulic oil)
- Gasket Mounting Type
- Solenoid Operated Pressure Regulating Valve Unit
- Max Working Pressure: 21MPa
- Rated Flow: 170L/min (at 0.1MPa min control pressure)
- Pressure Adjustment Range: 0-4MPa
- Minimum Pilot Rate Flow: 2.5L/min
- Pilot Pressure: 20 type (requires 2.4MPa or higher)
- Operating Temperature: 0-60°C (hydraulic oil)
- Gasket Mounting Type
- Tokyo Keiki Lucifer Pneumatic Solenoid Valve excels in diverse industrial applications.
- Robust construction: stainless steel, brass, synthetic, and aluminum.
- Mounting options: direct pipe or NAMUR interface for easy installation.
- Size range: G1/8 to G3 with Kv up to 1385 L/min.
- Handles pressures up to 100 bar.
- Customizable seal materials: NBR, FKM, EPDM, PTFE, PCTFE, PUR, Ruby.
- Versatile control of air, gases, liquids, water, oils, process fluids, and steam.
- Widely used in hydraulic and pneumatic applications.
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- 56 designs are transitioning to the 100 design.
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- Reduced power consumption
- Direct connection to PLCs
- Wide range of compatible hydraulic fluids
- Low-holding current operation for extended valve life
- Standard or left-hand build for flexibility
- Plug-in solenoids for easy installation
- Sink or source contact point input for compatibility with different control systems.
- Reduced power consumption
- Direct connection to PLCs
- Wide range of compatible hydraulic fluids
- Low-holding current operation for extended valve life
- Standard or left-hand build for flexibility
- Plug-in solenoids for easy installation
- Sink or source contact point input for compatibility with different control systems.
- Reduced power consumption
- Direct connection to PLCs
- Wide range of compatible hydraulic fluids
- Low-holding current operation for extended valve life
- Standard or left-hand build for flexibility
- Plug-in solenoids for easy installation
- Sink or source contact point input for compatibility with different control systems.
