Hydraulics
25%
- Introducing the P16V-RSTU-30-CMC-21-J (N5.5) piston pump from Tokyo Keiki (formerly Tokimec), redesigned to offer lower noise levels by an average of 5dB (as compared to older designs).
- With a body that is 60mm (2.3 inches) narrower the weight has been reduced by almost 9 lbs all while maintaining the same connection points.
- Direct replacement for models P16VMR-10-CMC-20-S121-Jand P16V-RSG-11-CMC-10-S121-J
- Simplifies Hydraulic Circuits: Equipped with a pressure compensator, the P16V-30 series eliminates the need for relief valves, streamlining hydraulic circuits and increasing overall efficiency.
- Our specialized cylinder bore surface treatment enhances pump life and ensures stable operation even in challenging environments with contamination risks.
25%
- Swash plate design
- Flange mounting (Foot bracket option)
- Right (R) or left (L) rotation
- Single side displacement
- SAE O-ring seal (G option)
- Various control options
- Maximum Displacement Adjustment (*C)
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
Installation and Pump-Prime Mover Alignment
The base for the electric motor and pump should offer sufficient rigid...
Learn More
Learn More
- Tokyo Keiki DG4VL-5 Series: Temperature-compensated flow control valve
- Energy-saving solenoid, solid-state relay for PLCs
- Supports phosphate ester fluid, durable wet armature design
- ISO 4401-AC-05-4-A dimensions, left-hand build option
- Plug-in solenoids (G ½), DC24V, handles 20.6 MPa back pressure
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- Metered flow in one direction and free flow in the reverse direction
- Available for flow control in both directions (S8 type)
- Compatible with mineral oil-based, water-glycol based, and phosphate ester fluids
- Tapered needle (standard) or notched needle (fine adjustment)
- Slotted adjustment screw or micrometer knob
- Out of Stock Models: Estimated Arrival 16 to 19 Weeks
- Integrated restrictor and check valve functions
- Compatible with standard hydraulic fluid, including phosphate ester fluid.
- One-way restrictor with tapered needle (standard) or notched needle (fine adjustment)
- Adjustable with slotted adjustment screw or micrometer knob
- Available in sizes: 16, 25, 32, 40, 50, 63, and 80
- Tokyo Keiki FN1 Series: Unmatched performance and reliability for your hydraulic systems.
- Metered flow in one direction and free flow in the reverse direction
- Available for flow control in both directions (S8 type)
- Compatible with mineral oil-based, water-glycol based, and phosphate ester fluids
- Tapered needle (standard) or notched needle (fine adjustment)
- Slotted adjustment screw or micrometer knob
- Out of Stock Models: Estimated Arrival 16 to 19 Weeks
