Tokyo Keiki Products

Filter
Showing 701 - 710 of 11943 items
  • Seal Kit for Tokyo Keiki SQP32 Pump.
  • Tokyo Keiki (Tokimec)
  • Replacement key for 25V / SQP2** (Type 1)
  • Tokyo Keiki (Tokimec)
  • Replacement key for 35V / SQP3** (Type 86)
  • Tokyo Keiki (Tokimec)
  • Installation: Suction port inside the tank
  • Function: Prevents ingress of foreign particles to protect the pump
  • Type: Inlet strainer
  • Rated Flow: 30 – 240 L/min
MSA-V30 | Air Breather MSA-V30 | Air Breather
20%

Replacement oil fill port and air breather for TU-PAC Series.

VA23919 | Shaft for Tokyo Keiki SQP432 (S111) Pump
20%
  • Replacement shaft for SQP432 (S111) Pump.
  • Tokyo Keiki (Tokimec)
  • Specifically used on Special Model S111.
VA25815 | Shaft for Tokyo Keiki SQP431 Pump
20%
  • Replacement pump shaft for SQP4 Pump (Type 11)
  • Tokyo Keiki (Tokimec)
  • Compatible with model codes ending with "18" (For standard models only)



20%
  • Replacement shaft for SQP431 (S111B) Pump.
  • Tokyo Keiki (Tokimec)
  • Specifically used on Special Model S111B.
DG4V-5-2C-M-P7L-T-6-50-JA875 | Solenoid Operated Directional Control Valve DG4V-5-2C-M-P7L-T-6-50-JA875 | Solenoid Operated Directional Control Valve
20%
Introducing the DG4V-5 Series Pressure Control Valve from Tokyo Keiki
  • Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
  • Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier 
  • Compatible with standard mineral oil-based fluid, water-glycol based fluid, and phosphate ester. 
  • Solenoid operated directional control valve with wet armature type. 
  • ISO 4401-AC-05-4-a mounting dimensions 
  • Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length 350mm, DC 12 V, 24 V only) 
DG4V-3-8C-U-B-100 | Solenoid Operated Directional Control Valve DG4V-3-8C-U-B-100 | Solenoid Operated Directional Control Valve
20%

Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki

  • Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
  • Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
  • Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
  • Solenoid operated directional control valve with wet armature type. 
  • ISO 4401-03 mounting dimensions
  • Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)