Tokyo Keiki Products
- Versatile fluid compatibility: Choose Mineral Oil or (F3) Phosphate Ester.
- Secure gasket-mounted installation for stability.
- Flexible drain options: External or Internal.
- Precise pressure control with three ranges.
- Tailored pilot configurations: Standard or S9.
- Variable vent pressure: Standard or High.
- Efficient cut-in pressures: 85% or 95%.
- Easy installation with 3/4-10UNC or M20 bolts.
- Maximum Working Pressure: 21MPa
- Flow Range: 80L/min
- Maximum Adjustable Pressure: 14MPa
- Rated Current: 1A
- Coil Resistance: 14Ω
- Hysteresis: <3%
- Repeatability: <1%
- Proportional Solenoid Relief Valve
- Max Working Pressure: 21MPa
- Flow Range: 0.3-1.5L/min
- Rated Current: 1A
- Coil Resistance: 14Ω
- Hysteresis: <3%
- Repeatability: <1%
- Proportional Solenoid Relief Valve
- Max Working Pressure: 21MPa
- Flow Range: 0.3-1.5L/min
- Rated Current: 1A
- Coil Resistance: 14Ω
- Hysteresis: <3%
- Repeatability: <1%
- Compatible with EP Series with DIN43650 connectors
- Input Commands: Analog voltage, ON/OFF control
- LAG Function: Reduces shock
- Coil Resistance:
◦ EPAD-**-1A-12: 10 to 14 Ω (at 20°C) (For EP Series)
◦ EPAD-**-1A6-12: 6 to 10 Ω (at 20°C) - Environmental Resistance: IP65 (with valve)
20%
- Compatible with EP Series with DIN43650 connectors
- Input Commands: Analog voltage, ON/OFF control
- LAG Function: Reduces shock
- Coil Resistance:
◦ EPAD-**-1A-12: 10 to 14 Ω (at 20°C) (For EP Series)
◦ EPAD-**-1A6-12: 6 to 10 Ω (at 20°C) - Environmental Resistance: IP65 (with valve)
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- Replaced by VV16-R-Y-B-11 (N5.5) with improved efficiency.
- Energy-saving design with low noise and pulsation suppression.
- Lead-free bearings for durability and environmental compliance.
- Eliminate relief valves, simplifying hydraulic circuits.
- Max. Displacement: 16 cm³/rev
- Easy maintenance with rotating element
- Fluid type choices include Mineral Oil (standard), Phosphate Ester (F3) or Water Glycol (F11).
- Flexible delivery port positions (A, B, C, D)
- Low noise triple vane pump
- Shaft end: Parallel Square Key (86)
- Pump Mounting: Foot Mounting (2*)
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil-based fluid, water-glycol based fluid, and phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-AC-05-4-a mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length 350mm, DC 12 V, 24 V only)
