Hydraulic Motors Categories
Hydraulic Motors
- High-efficiency, low-noise piston pump for energy-saving hydraulic systems
- Models: P21V, P31V, P40V, P70V, P100V, P130V, P16V
- Fluids: Mineral oil (standard), Water glycol (F11)
- Control options: Pressure compensator, Load sensing, Proportional, Multi-stage
- Mounting: With or without foot bracket
- Compact, high-speed, and reliable design
- Swash plate design
- Flange mounting (Foot bracket option)
- Right (R) or left (L) rotation
- Single side displacement
- SAE O-ring seal (G option)
- Various control options
- Maximum Displacement Adjustment (*C)
- Swash plate design
- Flange mounting (Foot bracket option)
- Right (R) or left (L) rotation
- Single side displacement
- SAE O-ring seal (G option)
- Various control options
- Maximum Displacement Adjustment (*C)
20%
- Choose between standard hydraulic fluid (Mineral Oil) or Water Glycol (F11)
- Mounting bracket (F) is available for mounting flexibility & stability
- Maximum Displacement: 21cm³/rev (10.0 GPM)
- Maximum Operating Pressure: 21MPa (3,050psi)
- Speed Range: 600-1800 (rpm)
- Rotation: Right-hand (R) & Left-Hand (L) Rotations available for flexibility
- Max Displacement Customization
- ISO 4401-AE-08-4-A (Size 06)
- Max Working Pressure: 31.5 MPa
- Max Flow: per Pressure-Flow Characteristics
- Allowable Tank Port Back Pressure: 20.6 MPa
- Min. Pilot Pressure: per Min Pilot Pressure Curves
- Max Pilot Pressure: 31.5 MPa
- Weight (Single Solenoid): 20.04 kg
- Weight (Double Solenoid): 20.64 kg
- Gasket for Tokyo Keiki (Tokimec) MHT 250 / 125 Vane Motor.
- Tokyo Keiki (Tokimec)
- ISO 4401-AE-08-4-A (Size 06)
- Max Working Pressure: 31.5 MPa
- Max Flow: per Pressure-Flow Characteristics
- Allowable Tank Port Back Pressure: 20.6 MPa
- Min. Pilot Pressure: per Min Pilot Pressure Curves
- Max Pilot Pressure: 31.5 MPa
- Weight (Single Solenoid): 20.04 kg
- Weight (Double Solenoid): 20.64 kg
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- Hydraulic Fluid: F3 Phosphate Ester for optimal efficiency and durability.
- High torque low speed internal gear motors CR Series
- Motor displacement code
- Various mounting selection
- Porting Options: S, P, G for seamless integration
- Various Shaft End Configurations to suit diverse needs.
- Typical lead times range from 23-26 Weeks.
- Hydraulic Fluid: F3 Phosphate Ester for optimal efficiency and durability.
- High torque low speed internal gear motors CR Series
- Motor displacement code
- Various mounting selection
- Porting Options: S, P, G for seamless integration
- Various Shaft End Configurations to suit diverse needs.
- Typical lead times range from 23-26 Weeks.
