Tokyo Keiki Products
20%
Introducing the DG4M4 Series Directional Valve, Tokyo Keiki
- Compact solenoid directional valve suitable for up to 21 MPa.
- Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
- Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester.
- Miniature size with a wet armature type for efficient operation.
24%
- Introducing the P16V-RSTU-30-CMC-21-J (N5.5) piston pump from Tokyo Keiki (formerly Tokimec), redesigned to offer lower noise levels by an average of 5dB (as compared to older designs).
- With a body that is 60mm (2.3 inches) narrower the weight has been reduced by almost 9 lbs all while maintaining the same connection points.
- Direct replacement for models P16VMR-10-CMC-20-S121-Jand P16V-RSG-11-CMC-10-S121-J
- Simplifies Hydraulic Circuits: Equipped with a pressure compensator, the P16V-30 series eliminates the need for relief valves, streamlining hydraulic circuits and increasing overall efficiency.
- Our specialized cylinder bore surface treatment enhances pump life and ensures stable operation even in challenging environments with contamination risks.
- Compatible with EP Series with DIN43650 connectors
- Input Commands: Analog voltage, ON/OFF control
- LAG Function: Reduces shock
- Coil Resistance:
◦ EPAD-**-1A-12: 10 to 14 Ω (at 20°C) (For EP Series)
◦ EPAD-**-1A6-12: 6 to 10 Ω (at 20°C) - Environmental Resistance: IP65 (with valve)
20%
- Upgraded model of VV16-R-Y-B-10 (N5.5) with improved efficiency.
- Energy-saving design with low noise and pulsation suppression.
- Lead-free bearings for durability and environmental compliance.
- Eliminate relief valves, simplifying hydraulic circuits.
- Max. Displacement: 16 cm³/rev
Introducing the DG4M4 Series Directional Valve, Tokyo Keiki
- Compact solenoid directional valve suitable for up to 21 MPa.
- Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
- Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester.
- Miniature size with a wet armature type for efficient operation.
20%
- Proportional Solenoid Relief Valve
- Max Working Pressure: 21MPa
- Flow Range: 0.3-1.5L/min
- Rated Current: 1A
- Coil Resistance: 14Ω
- Hysteresis: <3%
- Repeatability: <1%
20%
- Seal Kit for Tokyo Keiki SQP431 Pump.
- Tokyo Keiki (Tokimec)
- Replacement bearing for 45V / SQP4** Pump.
- Tokyo Keiki (Tokimec)
20%
- Enables air bleed air of hydraulic circuit.
- Closes once circuit pressure exceeds 0.14 MPa
- Special feature: S4 closure with only 0.3 L/min flow
- Maximum working pressure: 21 MPa
- Tokyo Keiki: Your trusted source for advanced hydraulic solutions
- Boost system performance with the ABT valve.
