All Products
No result found for your search.
Your cart is empty
- Home
- All Categories
- Miniature Solenoid Directional Valves
Filter
Miniature Solenoid Directional Valves
Filter
Showing 1 - 10 of 493 items
Introducing the DG4M4 Series Directional Valve, Tokyo Keiki
- Compact solenoid directional valve suitable for up to 21 MPa.
- Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
- Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester.
- Miniature size with a wet armature type for efficient operation.
Introducing the DG4M4 Series Directional Valve, Tokyo Keiki
- Compact solenoid directional valve suitable for up to 21 MPa.
- Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
- Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester.
- Miniature size with a wet armature type for efficient operation.
Replacement DC24V coil for Tokyo Keiki (formerly Tokimec) Flui-Trol DG4M4 Series Directional Control Valves.
- DC24V (50/60Hz)
- ±10% Allowable Voltage Tolerance
- Holding Wattage: 13.40W (60Hz) / 14.80W (50Hz)
NOTE: Delivery is 16-19 weeks.
Introducing the DG4M4 Series Directional Valve, Tokyo Keiki
- Compact solenoid directional valve suitable for up to 21 MPa.
- Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
- Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester.
- Miniature size with a wet armature type for efficient operation.
Introducing the DG4M4 Series Directional Valve, Tokyo Keiki
- Compact solenoid directional valve suitable for up to 21 MPa.
- Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
- Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester.
- Miniature size with a wet armature type for efficient operation.
Introducing the DG4M4 Series Directional Valve, Tokyo Keiki
- Compact solenoid directional valve suitable for up to 21 MPa.
- Features resin molded dual frequency coils (50/60 Hz) with two terminals, eliminating the need for coil rewiring.
- Designed for use with standard hydraulic fluids, including mineral oil-based, water glycol-based, and phosphate ester.
- Miniature size with a wet armature type for efficient operation.
- Replacement actuator for EP Series
- Tokyo Keiki (formerly TOKIMEC)
- Replacement actuator for EP Series
- Tokyo Keiki (formerly TOKIMEC)
- Compact Air Mass Flow Sensor
- Accurate Measurement: Converts flow at 20 °C, 1 atm (101.325 kPa).
- Gas Compatibility: For air and nitrogen; clean, dry gas required.
- Quick Response: 300 ms for 95% response.
- Reliable Output: 0.5 to 3.5 Vdc with 1 MΩ load resistance.
- Wide Range: -10 to +60 °C, -100 to +200 kPa.
- Low Power: 5 Vdc, 6 mA consumption.
- Measurement Range: MCS200L001 (0-1 L/min), MCS200L003 (0-3 L/min).
- Out of Stock Models: Estimated Arrival 4 to 6 Weeks
- Compact Air Mass Flow Sensor
- Accurate Measurement: Converts flow at 20 °C, 1 atm (101.325 kPa).
- Gas Compatibility: For air and nitrogen; clean, dry gas required.
- Quick Response: 300 ms for 95% response.
- Reliable Output: 0.5 to 3.5 Vdc with 1 MΩ load resistance.
- Wide Range: -10 to +60 °C, -100 to +200 kPa.
- Low Power: 5 Vdc, 6 mA consumption.
- Measurement Range: MCS200L001 (0-1 L/min), MCS200L003 (0-3 L/min).
- Out of Stock Models: Estimated Arrival 4 to 6 Weeks
Onsale Products
$ 3,068.00
$ 103,128.00
$ 103,128.00
Top Rated Products
$ 33,269.00
$ 103,128.00