Limited Deals
25%
- Introducing the P16V-RSTU-30-CMC-21-J (N5.5) piston pump from Tokyo Keiki (formerly Tokimec), redesigned to offer lower noise levels by an average of 5dB (as compared to older designs).
- With a body that is 60mm (2.3 inches) narrower the weight has been reduced by almost 9 lbs all while maintaining the same connection points.
- Direct replacement for models P16VMR-10-CMC-20-S121-Jand P16V-RSG-11-CMC-10-S121-J
- Simplifies Hydraulic Circuits: Equipped with a pressure compensator, the P16V-30 series eliminates the need for relief valves, streamlining hydraulic circuits and increasing overall efficiency.
- Our specialized cylinder bore surface treatment enhances pump life and ensures stable operation even in challenging environments with contamination risks.
20%
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
20%
- Swash plate design
- Flange mounting (Foot bracket option)
- Right (R) or left (L) rotation
- Single side displacement
- SAE O-ring seal (G option)
- Various control options
- Maximum Displacement Adjustment (*C)
20%
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
- Choose between standard hydraulic fluid (Mineral Oil) or Water Glycol (F11)
- Mounting bracket (F) is available for mounting flexibility & stability
- Maximum Displacement: 70cm³/rev (33.3 GPM)
- Maximum Operating Pressure: 21MPa (3,050psi)
- Speed Range: 600-1800 (rpm)
- Rotation: Right-hand (R) & Left-Hand (L) Rotations available for flexibility
- Max Displacement Customization
20%
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
1%
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
20%
Replacement oil fill port and air breather for TU-PAC Series.
20%
Introducing the DG4V-3 Series Directional Control Valve from Tokyo Keiki
- Wet type solenoid valve with low switching noise and superior valve life, no leakage worries
- Multiple valve options with various wiring connections, indicator lamp, surge suppressor, and AC/DC rectifier
- Compatible with standard mineral oil and water-glycol based fluids. Models beginning "F3" are also compatible with phosphate ester.
- Solenoid operated directional control valve with wet armature type.
- ISO 4401-03 mounting dimensions
- Electrical wiring options: plug-in solenoids, DIN43650 connectors, or flying leads (standard lead wire length: 350 mm, DC 12 V, 24 V only)
Featured Products
$ 97,635.00
$ 66,553.00
Onsale Products
$ 1,480.00
$ 3,009.00
$ 765.00
Top Rated Products
$ 1,480.00
$ 765.00
$ 743.00
