hydraulic pump
25%
- Introducing the P16V-RSTU-30-CMC-21-J (N5.5) piston pump from Tokyo Keiki (formerly Tokimec), redesigned to offer lower noise levels by an average of 5dB (as compared to older designs).
- With a body that is 60mm (2.3 inches) narrower the weight has been reduced by almost 9 lbs all while maintaining the same connection points.
- Direct replacement for models P16VMR-10-CMC-20-S121-Jand P16V-RSG-11-CMC-10-S121-J
- Simplifies Hydraulic Circuits: Equipped with a pressure compensator, the P16V-30 series eliminates the need for relief valves, streamlining hydraulic circuits and increasing overall efficiency.
- Our specialized cylinder bore surface treatment enhances pump life and ensures stable operation even in challenging environments with contamination risks.
25%
- Swash plate design
- Flange mounting (Foot bracket option)
- Right (R) or left (L) rotation
- Single side displacement
- SAE O-ring seal (G option)
- Various control options
- Maximum Displacement Adjustment (*C)
Installation and Pump-Prime Mover Alignment
The base for the electric motor and pump should offer sufficient rigid...
Learn More
Learn More
25%
- Axial piston type (Variable displacement)
- Max Pump Delivery: 8.4cm3/rev (≈ 4.0gpm)
- Max Pressure: 1.8-7MPa (145-1,015psi)
- Pressure Compensator Control
- Control: CB (w/o Flow Adjustment)
- Replacement shaft for SQP431 (S111B) Pump.
- Tokyo Keiki (Tokimec)
- Specifically used on Special Model S111B.
25%
- Replacement shaft for SQP321 Pump.
- Tokyo Keiki (Tokimec)
- Specifically used on Special Model S135 and S178.
- Replacement pump shaft for SQP1 Pump (Type 1)
- Tokyo Keiki (Tokimec)
- Compatible with model codes ending with "18" (For standard models only)
- Replacement pump shaft for SQP3 Pump (Type 11)
- Tokyo Keiki (Tokimec)
- Compatible with model codes ending with "18" (For standard models only)
- Replacement pump shaft for SQP31 Pump (Type 86)
- Tokyo Keiki (Tokimec)
- Compatible with model codes ending with "18" (For standard models only)
25%
- Replacement pump shaft for SQP32 Pump (Type 86)
- Tokyo Keiki (Tokimec)
- Compatible with model codes ending with "18" (For standard models only)
