Tokyo Keiki Products
20%
- Type: Stack-type pressure release valve
- Mounting: ISO 4401-05
- Max Pressure: 31.5 MPa
- Flow Capacity: 120 L/min (P, A, B, T), 40 L/min (A-T, B-T)
- Adjuster: Knob type
- Fluid Compatibility: Mineral oil, water-glycol, phosphate ester (F3 option)
- Ideal for precise A/B line pressure control in compact hydraulic systems
- Replacement of VV16-R-Y-B-20/21 (N5.5) with improved efficiency.
- Energy-saving design with low noise and pulsation suppression.
- Lead-free bearings for durability and environmental compliance.
- Eliminate relief valves, simplifying hydraulic circuits.
- Max. Displacement: 16 cm³/rev
20%
- Replacement bearing for P16V Piston Pump.
- Tokyo Keiki (Tokimec)
- Replacement bearing for P70VFR Piston Pump.
- Tokyo Keiki (Tokimec)
- Replacement bearing for P40V(F)R/L Piston Pump.
- Tokyo Keiki (Tokimec)
- Replacement bearing for P100V(F)R/L Piston Pump.
- Tokyo Keiki (Tokimec)
- Replacement bearing for P40V(F)R/L Piston Pump.
- Tokyo Keiki (Tokimec)
- Precision-engineered pressure control valve for industrial hydraulics.
- Unloads oil from P1 to T port under normal conditions for energy efficiency.
- Redirects flow from P1 to P2 when pilot solenoid is energized.
- Max Pressure: 21 MPa / Rated Flow: 100 L/min
- Mounting: Manifold or subplate / Size: 06
- Multiple cracking pressure options for unloading and secondary ends.
- Internal/external drain options.
- Pilot solenoid valve ordered separately (e.g., DG4V-3-2A-M-P7-H-7-50)
20%
- Precision-engineered pressure control valve for industrial hydraulics.
- Unloads oil from P1 to T port under normal conditions for energy efficiency.
- Redirects flow from P1 to P2 when pilot solenoid is energized.
- Max Pressure: 21 MPa / Rated Flow: 100 L/min
- Mounting: Manifold or subplate / Size: 06
- Multiple cracking pressure options for unloading and secondary ends.
- Internal/external drain options.
- Pilot solenoid valve ordered separately (e.g., DG4V-3-2A-M-P7-H-7-50)
- Precision-engineered pressure control valve for industrial hydraulics.
- Unloads oil from P1 to T port under normal conditions for energy efficiency.
- Redirects flow from P1 to P2 when pilot solenoid is energized.
- Max Pressure: 21 MPa / Rated Flow: 100 L/min
- Mounting: Manifold or subplate / Size: 06
- Multiple cracking pressure options for unloading and secondary ends.
- Internal/external drain options.
- Pilot solenoid valve ordered separately (e.g., DG4V-3-2A-M-P7-H-7-50)
