hydraulic pump

• Introducing the P16V-RSTU-30-CMC-21-J (N5.5) piston pump from Tokyo Keiki (formerly Tokimec), redesigned to offer lower noise levels by an average of 5dB (as compared to older designs).
• With a body that is 60mm (2.3 inches) narrower the weight has been reduced by almost 9 lbs all while maintaining the same connection points. 
• Direct replacement for models P16VMR-10-CMC-20-S121-Jand P16V-RSG-11-CMC-10-S121-J
• Simplifies Hydraulic Circuits: Equipped with a pressure compensator, the P16V-30 series eliminates the need for relief valves, streamlining hydraulic circuits and increasing overall efficiency. 
• Our specialized cylinder bore surface treatment enhances pump life and ensures stable operation even in challenging environments with contamination risks. 

• Swash plate design
• Flange mounting (Foot bracket option)
• Right (R) or left (L) rotation
• Single side displacement
• SAE O-ring seal (G option)
• Various control options
• Maximum Displacement Adjustment (*C)

Installation and Pump-Prime Mover Alignment The base for the electric motor and pump should offer sufficient rigid...
Learn More

• Axial piston type (Variable displacement)
• Max Pump Delivery: 8.4cm³/rev (≈ 4.0gpm)
• Max Pressure: 1.8-7MPa (145-1,015psi)
• Pressure Compensator Control
• Control: CB (w/o Flow Adjustment)

Replacement AC110V coil for Tokyo Keiki (formerly Tokimec) Flui-Trol DG4M4 Series Directional Control Valves.

• AC110V (50Hz/60Hz)
• ±10% Allowable Voltage Tolerance
• Initial Current: 0.36A (60Hz) / 0.42A (50Hz)
• Holding Current: 0.25A (60Hz) / 0.30A (50Hz)

NOTE: Delivery is 16-19 weeks.

• Replacement bearing for 25V / SQP2** Pump.
• Tokyo Keiki (Tokimec)

• Replacement washer for 25V / SQP2** Pump
• Tokyo Keiki (Tokimec)

• Replacement washer for 35V / SQP3** Pump
• Tokyo Keiki (Tokimec)

• Replacement washer for 3520V / SQP31 Pump
• Tokyo Keiki (Tokimec)

• Replacement snap ring for 35V / SQP3** Pump
• Tokyo Keiki (Tokimec)