RG - Flui-trol Direct pressure control valves - RCG-06-Z1-22-JA-S100-J

• Direct acting type pressure adjustment valve
• Depending on the internal or external pilot pressure and drain combinations can be used as sequence, counterbalance, relief, or unload valves.
• As sequence or counterbalance valve - reverse flow from secondary side to primary side is enabled with an integrated check valve.
• As sequence valve - valve is used to control multiple actuators which operate in succession. When pressure in primary side A exceeds setting pressure, pressurized flow is delivered to secondary side B.
• As counterbalance valve - valve generates pressure in the actuator return side to prevent runaway loads caused by gravity, etc. Pressurized oil is not released until primary side A pressure exceeds the setting pressure.
• As relief valve - in addition to functioning as a safety valve to prevent excessive pressure in the circuit, it acts to maintain fixed maximum circuit pressure. Pressurized oil is released to tank when pressure in primary side A exceeds the setting pressure.
• As unload valve - pressurized oil is released to tank when external pilot pressure exceeds the pressure setting to unload the circuit.

Note - All standard options are omitted from the product model number.

Hydraulic fluid

• Standard - mineral oil-based fluid, water glycol-based fluid
• F3 - Phosphate ester-based fluid

Check valve options

• RG - No check valve
• RCG - With check valve

Size - 03, 06, 10

Pressure adjustment range

• X - 0.07 ~21 MPa
• Y - 0.14 ~42 MPa
• Z - 0.25 ~88 MPa
• A - 0.53 ~75 MPa
• B - 0.88 ~5 MPa
• A - 1.75 ~ 7 MPa
• F - 3.5 ~ 14 MPa

Auxiliary pilot port

• Standard - No auxiliary pilot port
• P - Auxiliary pilot port

Valve function

• 1 - Internal pilot, internal drain
• 2 - Internal pilot, external drain
• 3 - External pilot, external drain
•  4 - External pilot, internal drai